Switching Power Supplies - 12 Watt Series Specifications

9-12 Watt Series

Item	Model No.	Output Voltage	Output Current	Output Power
1	SPS12-001/U/A	3V~4.5V	0~2A	9W
2	SPS12-002/U/A	4.6V~5.5V	0~2A	11W
3	SPS12-003/U/A	5.6V~6.5V	0~2A	12W
4	SPS12-004/U/A	6.6V~7.5V	0~1.8A	12W
5	SPS12-005/U/A	7.6V~8.5V	0~1.5A	12W
6	SPS12-006/U/A	8.6V~9.5V	0~1.3A	12W
7	SPS12-007/U/A	9.6V~10.5V	0~1.2A	12W
8	SPS12-008/U/A	10.6V~11.5V	0~1.1A	12W
9	SPS12-009/U/A	11.6V~12.5V	0~1A	12W
10	SPS12-0010/U/A	12.6V~13.5V	0~0.9A	12W
11	SPS12-0011/U/A	13.6V~14.5V	0~0.8A	12W
12	SPS12-0012/U/A	14.6V~15.5V	0~0.8A	12W
13	SPS12-0013/U/A	17V~19V	0~0.7A	12W
14	SPS12-0014/U/A	19V~21V	0~0.6A	12W
15	SPS12-0015/U/A	23V~25V	0~0.5A	12W

Remark:

SPS12-XXX For 2pin Inlet

SPS12-XXXU (wall plug) For VDE Plug

SPS12-XXXA (wall plug) For UL Plug

Main Specifications

Universal Input 100 to 240 VAC

Single output option

Overload protection

100% Hi-Pot tseted

100% cycling burnt-in

Output Specifications

Line regulation - 1%

Load regulation - 5%

Maximum power - 12W for convection cooled

Hold up time - 10ms at full load, 120VAC

Efficiency 65~75% typical at full load, varies with distribution of loads among outputs

Transient response main output 50-100%
50~100% max. dev. 10ms recovery

Ripple & Noise, 1MHZ BW 1%MAX

Over-current protection - Yes (Output short protection)

Input Specifications

Input voltage 90 to 264 VAC

Input frequency 47 to 63 HZ

Input current 0.5A

Inrush current 40A max

Protection 2A / 250V fuse

Configuration IEC-320 2PIN INLET

(U: Europe plug A: UL plug)

Case size: 77x36x26 mm

Electrical Spefications

Dielectric strength test 4.2K VDC primary to secondary

Leakage current less than 0.25mA

Weight:

Approx 130 g

Environmental Specifications

Operating temperature, full load, no derating, 0ºC~40ºC

Non-operating -20~85ºC

Relative humidity non-condensing 0~95%

Altitude sea level up to 10000 feet

Cooling Convection cooled

Vibration 10 to 55Hz, Amplitude 2g sweep

1 min for x.y.z axis each

cycle:20

Safety Standard

Designed to meet the standard of:

UL 1950

EN 60950

PSE Mark

TUV (GS)

EMI

FCC Class B . CISPR
Class B. VCC 1

Class II

Checkout our complete product range >>

Switching Adaptor

Products up to 100 watt and all models are approved to international safety standards. More...

Adaptor/Charger

Products power range is from 0.2 watt to 30 watt. International versions include
- UL (USA)
- Europe(TüV)
- UK (BABT & BEAB)
- SAA (Australia)
- T-Mark (Japan)
More...

Transformer

With over 20 years of experience in transformer design and manufacturing, TSEC manufacture a wide variety of custom transformers for OEM's. More...